Holden 253-308 V8 BLOCK HUGGER
12 June 2022
Holden HG-HT Chev Small Block TUNED
12 June 2022
Holden HG-HT Chev Small Block TRI-Y
$1,203.40 GST included
#PH5302 – Chev Small Block. Manual & Automatic. TRI-Y Design.
PH 5302 – Holden HG-HT with Chev Small Block. Manual & Automatic. TRI-Y Design.
| Part #: | PH 5302 | ||
| P/Steering: | No | Gasket: | DSF 9 |
| Air Con: | N/A | Primary Pipe: | 1⅝” (41mm) |
| Oxy Sen: | N/A | Secondary Pipe: | 2″ (51mm) |
| E.G.R: | N/A | Outlet: | 2¼” (57mm) |
| Y Branch: | N/A | Fitting Time: | 3 Hrs |
Note:
- If required with alt. bracket on LH side order PH 5303
- Will fit slant plug heads
- Will fit Powerglide automatic
- Will fit Turbo 400 automatic if vehicles floor has been cut for correct fitment of automatic
- Will not fit column automatic unless linkages are modified
- Will fit with power steering
- Will only fit with original engine mounting spacers or; PACEMAKER spacers Part number PEMP 307
- Spacers must be fitted on correct side of vehicle (RH spacer is ¼” higher than LH spacer)
PH5302 & PH5303 headers are designed to fit with a genuine factory starter when fitting to a 153 tooth (10 1/2″) flex plate (auto only) or a 153 tooth (13″) ring gear (manual only).
PH5302 & PH5303 headers will not fit the genuine factory starter when fitting to 168 tooth (11″) flex plate (auto only) or a 168 tooth (14″) ring gear (manual only). Pacemaker recommends the use of an after market hi-torque starter. Please choose carefully as not all starter solenoids are in the same position.
Related products
-
Commodore VT-VY & Statesman WH 3.8L V6 Ecotec S/C TUNED
$1,038.40 GST included#PH5060 – 3.8L V6. Supercharged. Automatic. TUNED Design.
-
Holden HD-HZ (Red Motor) Powerglide TRI-Y
$756.80 GST included#PH5014 – All Red Motors. Powerglide Automatic. TRI-Y Design.
-
Holden HJ-HZ (Red Motor – Post EGR) TRI-Y
$825.00 GST included#PH5005 – All Red Motors – Post E.G.R. Manual & Automatic. TRI-Y Design.
